Epson ERC-39/ERC-43 Compatible Endorsement Ribbon | TM-H6000 | 6-Pack

Epson ERC-39/ERC-43 Compatible Endorsement Ribbon - Black and Purple - 6-Pack

The ERC-39 and ERC-43 are interchangeable endorsement ribbons for the check validation and journal station on Epson TM-H6000 series hybrid printers. This compatible 6-pack replaces the Epson ERC-43B (black) and ERC-39P (purple) at a fraction of the OEM cost. Each ribbon is brand new, individually sealed, and built with ISO 9001/14001 certified components.

If you have a TM-H6000, this is the ribbon for the endorsement station - not the receipt station. For the slip/receipt station, you need the ERC-32 ribbon (sold separately on our store).

Key Features

• ✅ Direct replacement for Epson ERC-43B (black) and ERC-39P (purple)
• ✅ 6 ribbons per pack
• ✅ ERC-39 and ERC-43 are cross-compatible - one ribbon fits both part numbers
• ✅ Designed for the endorsement/journal station on hybrid printers
• ✅ New compatible cartridge - not remanufactured
• ✅ ISO 9001 / ISO 14001 certified manufacturing
• ✅ 1-year warranty against defects
• ✅ Drop-in installation - no tools required

Specifications

Compare and Save

Why Buy From TerminalDepot

▶ Compatible Printers (Full List)

Epson: TM-H6000 (endorsement station), TM-H6000II (endorsement station), TM-H6000III (endorsement station), TM-H6000IV (endorsement station), TM-H6000V (endorsement station), M-U110, M-U115, M-U310, M-U311, M-U312, M-V110, MT311, TM-U120, TM-U120D, TM-U120DII.

Citizen: CD-S500, CD-S501.

Samsung: ER-350II.

▶ Which Station Does This Ribbon Go In?

This ribbon is for the ENDORSEMENT or JOURNAL printing station on Epson TM-H6000 series hybrid printers. The TM-H6000 has multiple print stations that each use a different ribbon:

- Slip/Receipt station: Uses ERC-32 ribbon (sold separately on TerminalDepot)
- Endorsement/Journal station: Uses ERC-39 or ERC-43 ribbon (this product)

If you are replacing the ribbon that prints on standard receipts, you need the ERC-32 instead.

▶ How to Install

1. Power off the printer and open the endorsement ribbon access cover (this is separate from the main receipt ribbon cover).
2. Remove the old endorsement ribbon cartridge by grasping it and pulling straight out.
3. Unpack the new ribbon. Turn the ribbon knob clockwise to take up any slack.
4. Align the cartridge with the endorsement station guides and press firmly until it clicks.
5. Close the cover and run a test endorsement print to verify ink distribution.