Star Micronics SP700 Kitchen Ticket Paper Rolls 3" x 165' | Restaurant Guest Checks – 1-Ply Bond (SP742ME SP712ME Compatible)

Bond Paper Rolls for Star Micronics SP700 Kitchen Printer — Premium Single-Ply American Made

Keep your Star Micronics SP700 series kitchen printer producing crisp, clear restaurant orders and tickets with every roll. These premium single-ply bond paper rolls are specifically designed for all Star SP700 series impact printers and deliver reliable performance in busy commercial kitchens.

Key Features

• ✅ Guaranteed perfect fit for all Star SP700 series including SP742ME, SP742ML, SP712ME, and SP712ML
• ✅ Built for commercial kitchens, handles heat, grease, and high-volume use
• ✅ 165 feet per roll, 10% longer than standard 150' rolls + red end-of-roll warning stripe for fewer changes and no surprises
• ✅ Lint-free single-ply bond paper protects your printer's impact head
• ✅ Produces crisp, smudge-free kitchen tickets and guest checks
• ✅ American-made premium quality for consistent, crisp printing
• ✅ NOT thermal paper, requires Star RC-700B ink ribbon (sold separately)

Specifications

▶ How to Load Paper (4 Simple Steps)

1. Open the paper cover by pulling the release lever on the front of the printer.
2. Remove any old roll and place the new roll so paper feeds from underneath.
3. Pull 3–4 inches of paper past the auto-cutter (SP742) or tear bar (SP712).
4. Close the cover firmly and press the Feed button to test.

Tip: If prints come out blank, check that the Star RC-700B ink ribbon is installed. If prints are faded, replace the ribbon, the paper is not the issue.

▶ Need Duplicate Copies? Compare Bond vs Carbonless Paper

The Star SP700 series supports three paper types:

▶ Full Compatible Printer List

Star Micronics SP700 Series (Primary Fit)

• Star SP742ME: Ethernet, auto-cutter (also sold as Square Kitchen Printer)
• Star SP742ML: Ethernet, auto-cutter (also sold as Clover Kitchen Printer)
• Star SP742MD: Serial interface, auto-cutter
• Star SP742MU: USB interface, auto-cutter
• Star SP712ME: Ethernet, tear bar (no auto-cutter)
• Star SP712ML: Ethernet, tear bar

Star Micronics SP500 Series (Also Compatible)

• Star SP512ME, SP512ML
• Star SP542ME, SP542ML

POS System Kitchen Printers

• Square Kitchen Printer: Star SP742ME
• Clover Kitchen Printer: Star SP742ML
• Toast TKP300 / SNBC BTP-M300

Other Compatible 3" Impact Printers

• Epson TM-U220 Series (TM-U220A, TM-U220B, TM-U220D)
• Bixolon SRP-275, SRP-270, SRP-500 Series
• Citizen DP-600 Series

Any 3-inch impact/dot matrix printer with a 1/2" core is compatible with these rolls.

▶ SP742 vs SP712 — What's the Difference?

Both models use the exact same 3-inch bond paper and RC-700B ribbon. The only difference is the cutting mechanism:

Both use the same paper. If you have any SP700 series printer, these rolls fit perfectly.

▶ Troubleshooting — Blank or Faded Prints

⚠️ Important: The Star SP700 series is an impact/dot matrix printer. It requires bond or carbonless paper AND a Star RC-700B ink ribbon.

• Blank prints? Check that a Star RC-700B ink ribbon is installed. Thermal paper will also feed through blank, make sure you're using bond paper.
• Faded prints? Replace the Star RC-700B ribbon. The paper does not affect print darkness, only the ribbon condition does.
• Paper jams? Make sure the roll is seated properly with paper feeding from underneath.

The SP700 does NOT use thermal paper. Thermal paper (shiny/slippery) is for thermal printers like the Star TSP100 or TSP143. Do not interchange them.

▶ About Our American Made Bond Paper

Every roll is manufactured in the USA to strict quality standards. Our 165-foot rolls are 10% longer than the industry-standard 150-foot rolls, that's 750 extra feet per 50-roll case.

Our lint-free bond paper protects your printer's impact head from fiber buildup that causes faded text, streaks, and premature wear. The red end-of-roll warning stripe alerts you before running out mid-service.