Ingenico Lane 3600 12V USB Cable | No Power Supply Needed | 2m (296178419AB)

Ingenico Lane 3600 12V USB Cable | Self-Powered Connection

OEM Ingenico 12V USB cable for the Lane 3600 terminal. This cable connects your Lane 3600 to a 12V USB port on your POS system or electronic cash register and powers the terminal through that connection. No separate external power supply needed. Part number 296178419AB.

This is the cable you need when your POS system has a dedicated 12V USB output port. One cable handles both data and power in a single connection. Eliminates cable clutter and removes the need for a separate wall adapter. 2 meters (6.56 feet) in length.

▶ About the Ingenico Lane 3600

The Ingenico Lane 3600 is a next-generation countertop payment terminal used in retail, restaurant, and hospitality environments. It supports EMV chip, contactless NFC, and magstripe payments with an Android-based operating system and touchscreen display.

The Lane 3600 requires both a data connection (to communicate with the POS system) and a power source (to operate). This 12V USB cable provides both through a single connection when paired with a compatible 12V USB port.

▶ When to Use This Cable vs Other Lane 3600 Cables

This cable (296178419AB) - 12V USB, no PSU needed: Use when your POS system or ECR has a dedicated 12V USB output port. One cable provides both data and power. No wall adapter required. 2 meters length.

Lane 3600 Dual Gang USB 5m (296116381AE): Use when you need extra length (up to 16.4 feet) and your POS system has standard 5V USB ports. Two USB plugs split data and power. No separate Ingenico power supply needed.

If you are unsure which cable you need, check your POS system for a port labeled "12V USB" or "powered USB." If you see one, this is your cable. If you only have standard USB ports and need more than 2 meters of length, use the dual gang cable instead.

▶ Installation

1. Power off the Lane 3600 terminal.

2. Locate the cable port on the bottom of the Lane 3600.

3. Connect the terminal end of the cable (Ingenico proprietary connector) into the terminal port until it clicks.

4. Connect the USB end of the cable into the 12V USB port on your POS system or ECR.

5. The terminal should power on automatically once the POS system is active.

6. Confirm data connection by running a test transaction through your POS software.

If the terminal does not power on, verify that the USB port on your POS system is a 12V output. Standard 5V USB ports will NOT provide enough power to operate the terminal.

▶ What Is Included

✅ 1x OEM Ingenico 12V USB cable (296178419AB)

✅ 2 meters (6.56 feet) length

✅ New, unused condition

❌ Terminal NOT included

❌ Power supply NOT included (not needed with this cable when used with a 12V USB port)

❌ POS system NOT included

▶ Compatibility

✅ Ingenico Lane 3600

✅ Also works with: Ingenico Lane 3000, 5000, 7000, 8000 and Ingenico iSC250, iSC350, iSC480

⚠️ Requires a 12V USB port on your POS system or ECR. This cable will NOT work with standard 5V USB ports.

❌ Does NOT fit Ingenico iPP310, iPP320, iPP350. Different connector.

▶ Troubleshooting

Terminal does not power on: Verify the USB port on your POS system outputs 12V. Standard USB ports only output 5V and cannot power Lane terminals. Check your POS system documentation or look for a "12V" label near the port.

Terminal powers on but no data connection: Check POS software configuration. The Lane 3600 must be configured as a connected payment device in your POS system. Restart both the POS and terminal after connecting.

Intermittent power loss: Check that the cable connector is fully seated in the terminal. A loose connection will cause power drops. Also verify the POS system USB port is not overloaded with other powered devices.

▶ Other Supplies for the Ingenico Lane 3600

Lane 3600 Dual Gang USB cable (5m). Ethernet cables. Thermal paper rolls. Privacy shields. Mounting brackets. Check our Ingenico Lane accessories collection for compatible parts.